Athens hosts the Graphene Week 2017

Graphene set to go from the lab to the marketplace

Español

In the future, the exceptional properties of graphene will make car seats and aircraft antenna protection enclosures lighter, which will reduce fuel consumption. These are just two examples of the uses of this revolutionary material exhibited during the last week of September in Athens, where companies and research centres presented their latest results for producing it at an industrial level.

More info about:
Graphene Flagship
Graphene Week
graphene

Enrique Sacristán | Athens | | September 30 2017 08:00

<p>Panel prototype with incorporated graphene for rear seat back-panels in vehicles. / Polygraph</p>

Panel prototype with incorporated graphene for rear seat back-panels in vehicles. / Polygraph

In a hotel at the foot of the Acropolis, built during the 5th century B.C., the same era in which mathematicians and philosophers from Ancient Greece presented the atomic theory, more than 700 scientists and experts from 43 countries assembled to celebrate the Graphene Week. Under the motto “the future meets the past”, experts focused on the sheet of carbon atoms which, when joined to form hexagonal rings, known as graphene.

The meeting, held between the 25-29 of September in Athens, was organised by the European initiative Graphene Flagship to discuss latest research and applications of graphene, "the most amazing and versatile material known to mankind,” according to the event organisers.

The extraordinary mechanical and electrical properties of this material, together with the list of potential applications, have triggered intense interest among research teams across the globe. In Europe, the Graphene Flagship initiative coordinates the main groups on the continent and promotes collaborations with companies to accelerate the use of graphene in commercial products.

C. R. Fiat has taken part in the production of a technology demostrator with graphene used in a panel for rear seat back in vehicles

An example is Polygraph, a four-year EC funded project coming to an end in October 2017 and made up of 14 partners across Europe: seven SMEs, four large companies, two universities and one research centre. Together they have developed two demonstrators incorporating graphene that can help reduce the weight of some vehicle and aircraft components, resulting in better fuel economy and lower harmful emissions.

One of the devices is a panel for rear seat back in vehicles, where graphene is added to the composite resin with which these components are made, proving improvement to the thermal, mechanical and electrical properties.

The Italian firm Fiat has taken part in the production of this technology demonstrator through its Centro Ricerche Fiat SCpA, and the UK company NetComposites, which is also the coordinator of the Polygraph project, is responsible for characterising and manufacturing the composite material.

avion_grafeno

Radome, an enclosure that protects an antenna, manufactured with polymers, fibreglass, epoxy resins and graphene. / Polygraph

Development engineer, Maria Konstantakopoulou from NetComposites, highlighted the role of all the other PolyGraph partners in each of the steps required to reach the end product: “Robnor Resins (United Kingdom) supplies the epoxy resin, the Spanish company Avanzare and the Swiss company Imerys produce the graphites and graphenes, which are then mixed with the resins using advanced mixing and exfoliation techniques developed by the German SMEs YTRON and NETZSCH.

For Gary Foster, project manager at NetComposites and Project Manager of PolyGraph, the project’s key targets have been met: “We have managed to develop process methods for exfoliating expanded graphite and generating graphene at an industrial level. And these processes have been used to produce a material with improved physical and electrical properties for composites, coatings and adhesives”.

The second demonstrator presented by the team during Graphene Week was also manufactured in this way: a radome or sonar housing, which is an enclosure to protect an antenna without interfering with radio waves. It is made with fibreglass-reinforced polymers and resins enriched with graphene.

 

grafeno coches

The engineers Selim Stahl, from the Swedish institute RISE, and Maria Konstantakopoulou from the UK company NetComposites, presenting the radome or sonar housing and the panel for rear seat back-panels in vehicles manufactured with graphene materials. / SINC

The UK company BAE Systems, one of the leading manufacturers in the European aerospace sector, took part in the design and analysis of this prototype, proving that graphene technologies can now be applied to some components within this industry.

A radome or sonar housing to protect an antenna is made with fibreglass-reinforced polymers and resins enriched with graphene

Researchers at the Queen Mary University of London (QMUL) also took part in the development of this component and published some of their findings in scientific magazines: In 2016 they presented a technique in the Journal of Nanomaterials to improve the electrical and thermal properties of polystyrene-graphene nanofibers via electrospinning and this year they offered solutions in the Composites Science and Technology journal, for filtration problems encountered when incorporating the innovative material into resins. 

Another partner expected to publish their results is the Swedish research institute, RISE, which has estimated the costs of the life cycle and the environmental impacts - including waste management - associated with the production of the panel for car seats and the radome for aircrafts. They have also tested the effects of fire on these products.

The details were explained by the engineer, Francine Amon from this company during one of the Graphene Week sessions, in which Julio Gómez, the director of Avanzare, defined the advantages of graphene materials with large lateral dimensions "which, like reduced graphene oxides, offer very high electric conductivity and can compete with other materials, such as conductive lampblack”.

Less marketing and more genuine industry

grafeno_avanzare

The fine sheet of graphene can be seen behind the mesh grid of the transmission electron microscope / Avanzare

This entrepreneur from Avanzare has just been appointed chairman of the Alianza Española en Grafeno (Spanish Graphene Partnership), aimed at bringing producers and users together so they know exactly what is being sold to them. "Graphene-based materials need to be ‘labelled’, indicating how they have been produced and their properties; transparency is essential. Graphene does not need to be a marketing issue, but a genuine industry for technical applications," added Gómez.

The Polygraph results suggests this could be possible and apart from the two technology demonstrators, a number of PolyGraph partners are considering using graphene in their products, although, to date, none of the have manufactured a component or a specific device intended for the marketplace.

The PolyGraph project has received funding from the European Union’s Seventh Framework Programme for research, technological development and demonstration under grant agreement no 604143. A budget of 7.2 million euros was allocated to this project (5 million of which were provided by the European Commission), which also had the collaboration of the  Padova University (Italy), the UK company HMG paints, specialising in coatings; the French company SAIREM with its microwave manufacturing technologies and The Institute of Occupational Medicine (United Kingdom), covering health and safety issues associated with the production of Graphene.

Polygraph is just one example of a whole host of projects supported by the European Union. In addition, the Graphene Flagship initiative, launched by the European Union in 2013 and with a total budget of around 1 billion euros, aimed at getting graphene out of research labs and into commercial applications to benefit society as a whole.

As Costas Galiotis from the Greek foundation, Hellas, explained as host of the Graphene Week, “the technological advances envisaged by the use of graphene and other 2D materials may have an equal, or even greater, impact on future technologies than the achievements in science, culture and technology of 5th century BC in Athens”.

Graphene Week 2018 in San Sebastián

During the closing of Graphene Week 2017 was announced the city that will host this international congress next year: San Sebastián, in Spain. The host institution will be a nanoscience leading center of the Basque Country, CIC nanoGUNE, as informed its director, Jose M. Pitarke.

Graphene week

.

SINC produces scientific news for the European project SCOPE, coordinated by FECYT and funded by the European Union through Horizon 2020, its funding program. The SCOPE mission is to communicate visionary research results of partnering projects in the framework of the Graphene Flagship and the Human Brain Project, as well as to enhance the FET Flagships partnering environment in the European Union.

Geographical area: Europe
Source: SINC

Enrique Sacristán

Enrique Sacristán

Journalist and biologist. At SINC he is editor for ‘hard’ sciences: maths, physics and chemistry.

Comments

WE WANT TO KNOW YOUR OPINION

Please be reminded that SINC is not a health clinic. Consult your doctor for advice on health matters

Powered by eZ Publish™ CMS Open Source Web Content Management. Copyright © 1999-2010 eZ Systems AS (except where otherwise noted). All rights reserved.